Leitz centrifugal wind chassis trial operation precautions

September 08, 2020

Before the official operation of the Reitz centrifugal wind chassis, the test operation must be carried out. Below, Dongguan Ruitian Electromechanical Co., Ltd. "target=_blank> Electromechanical Technology Co., Ltd. summarizes the places where the centrifugal wind chassis test operation needs attention.



Before the trial operation of the Reitz centrifugal wind chassis, carefully read the product manual and check whether the wiring method is consistent with the wiring diagram; check whether the working voltage of the power supply of the fan power supply "target=_blank> meets the requirements, whether the power supply is out of phase or in phase. Whether the capacity of the distributor components meets the requirements.



After checking the above items and confirming the test run, Dongguan Ruitian Electromechanical Co., Ltd. "target=_blank> Electromechanical Technology Co., Ltd. recommends that two or more people need to perform the test run, and the power supply is controlled by others. If the wind turbine is running, observe whether the current is balanced, whether the current exceeds the rated current, and whether the fan is running abnormally. If an abnormal phenomenon is found, stop it immediately.



Start the trial run of the Reitz centrifugal wind chassis and start the low speed first to check if the rotation direction is correct. Start the high speed after stationary and check if the direction of rotation is correct. Do not run at a low speed. If the blade does not stop, start the high speed. If this is the case, it will easily cause a reversal, resulting in damage to the centrifugal wind casing.



Ruitian Electromechanical "target=_blank> Electromechanical Tips, in order to avoid damage to the Leitz centrifugal wind chassis test run, we must pay attention to these aspects.

Http://news.chinawj.com.cn Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn

Cuplock Scaffolding

Cuplock Scaffolding,Cuplock Scaffolding System,Cuplock System,Cup Lock Scaffolding

Kaiping Youying Metal Products Co., Ltd , https://www.yyscaffold.com